PRODUCTS SIZE ID IN (mm) INCH EQUIVALENT AVAILABLE PRESSURE CLASS (PN) APPLICATIONS/SPECIAL NOTE
REDUCER DOUBLE STAGE

 

 32 x 20 1 x 1/2 10 , 16

These are used to convert the service line flow in extra small line.
40 x 25 1.1/4 x 3/4 6 , 10 , 16
50 x 32 2 x 1 6 , 10 , 16
63 x 40 2 x 1.1/4 6 , 10 , 16
75 x 50 2.1/2 x 1.1/2 6 , 10 , 16
90 x 63 3 x 2 6 , 10 , 16
110 x 75 4 x 2.1/2 6 , 10 , 16
140 x 90 5 x 3 4 , 6 , 10 , 16
160 x 110 6 x 4 4 , 6 , 10 , 16
200 x 160 8 x 6 4 , 6 , 10 , 16
PRODUCTS SIZE ID IN (mm) INCH EQUIVALENT AVAILABLE PRESSURE CLASS (PN) APPLICATIONS/SPECIAL NOTE

REDUCER TRIPLE STAGE

 

 

 63 x 32 2 x 1 6 , 10 , 16

These are used to convert a large diameter service line directly to a smaller diameter line.
72 x 40 2.1/2 x 1.1/4 6 , 10 , 16
90 x 50 3 x 1.1/2 6 , 10 , 16
110 x 63 4 x 2 4 , 6 , 10 , 16
140 x 75 5 x 2.1/2 4 , 6 , 10 , 16
160 x 90 6 x 3 4 , 6 , 10 , 16
200 x 110 8 x 4 4 , 6 , 10 , 16
PRODUCTS SIZE ID IN (mm) INCH EQUIVALENT AVAILABLE PRESSURE CLASS (PN) APPLICATIONS/SPECIAL NOTE
SERVICE SADDLE

 32 x 20 1 x 1/2 10 , 16

These are used taping the large service main line into small feeder line for house hold purposes, and for connecting air release valves.
Outlets of 20mm (1/2"), 25mm
(3/4"), or 32mm(1") either plain
or threaded offered with nut bolts and neoprene gasket.
In 200mm size Service Saddles are provided with 32mm(1"),
40mm(1 1/4), 50mm(1 1/2) &
63mm (2") threaded outles.
 
40 x 25 1.1/4 x 3/4 6 , 10 , 16
50 x 32 2 x 1 6 , 10 , 16
63 x 40 2 x 1.1/4 6 , 10 , 16
75 x 50 2.1/2 x 1.1/2 6 , 10 , 16
90 x 63 3 x 2 6 , 10 , 16
110 x 75 4 x 2.1/2 6 , 10 , 16
140 x 90 5 x 3 4 , 6 , 10 , 16
160 x 110 6 x 4 4 , 6 , 10 , 16
PRODUCTS SIZE ID IN (mm) INCH EQUIVALENT AVAILABLE PRESSURE CLASS (PN) APPLICATIONS/SPECIAL NOTE

END CAP PLAIN

 

 20 1/2 10,16

These are used to close the end of pipe line.
Threaded End Caps (inside threads) (BSP Thread) are available in
20,25,32,40,50,63,75,90 &
110mm sizes.
 
25 3/4 10,16
32 1 6 , 10,16
40 1.1/4 6, 10,16
50 1.1/2 4 , 6, 10,16
63 2 4 , 6, 10,16
75 2.1/2 4 , 6, 10,16
90 3 4 , 6, 10,16
110 4 4 , 6, 10,16
140 5 4 , 6, 10,16
160 6 6, 10,16
180 7  6, 10,16
200 8  6, 10,16
PRODUCTS SIZE ID IN (mm) INCH EQUIVALENT AVAILABLE PRESSURE CLASS (PN) APPLICATIONS/SPECIAL NOTE

END CAP THREADED

 

 20 1/2 10,16

These are used to close the end of pipe line.
Threaded End Caps (inside threads) (BSP Thread) are available in
20,25,32,40,50,63,75,90 &
110mm sizes.


 
25 3/4 10,16
32 1 10,16
40 1.1/4 6, 10,16
50 1.1/2 6, 10,16
63 2 6, 10,16
75 2.1/2 6, 10,16
90 3 6, 10,16
110 4 6, 10,16
140 5 6, 10,16
160 6 6, 10,16
180 7 6, 10,16
200 8 6, 10,16
SALIENT FEATURES :

General Dimensions conforming to IS 7834 - 87.

Wall thickness is designed to meet required working pressure.

Made to close dimensional tolerance. Wide range for different applications. Higher working pressure rating of 10 kgf/
cm2 for 20, 25 & 32 mm & 6 Kgf/cm2 for40 mm & above sizes.